Click on the image to check the artwork
By certification 
Cheap Sale Floor-mounted Fume Hoods For Laboratory Equipment
(1) Shell of upper and lower cabinets:
Steel fume hood: 1.0mm cold rolled steel machine is used for sheet metal forming, and the surface is finished by automatic dehydration, deoiling, pickling, phosphating and powder spraying. Acid and alkali resistance, corrosion resistance.
(2) table: 12.7mm thick solid physical and chemical board;
(3) Upper cabinet lining board: 5MM thick anti-bete board is adopted; Flow plate fixing seat: made of PC material by molding, with good rigidity, and can meet the environmental requirements of acid and alkali resistance and high temperature resistance in the operation room. The whole set of fixing seats includes a back plate fixing seat, a guide plate fixing knob and a distillation rack mounting hole seat part.
(4) Window: 5mm thick tempered glass (including tolerance) is adopted. The door frame and handle are made of aluminum alloy. The glass window is embedded in the aluminum alloy door frame. Two translation sliding wheels are installed on both sides of the door frame to ensure that the window does not deviate when moving up and down, moves lightly, and the window can stop at any position.
(5) Suspension mode and counterweight: the transmission of the adjusting door of the fume hood is upgraded from the traditional steel wire rope and pulley to the synchronous belt push-pull connection mode, which ensures the smooth lifting of the adjusting door and achieves the best anti-corrosion effect. The belt core contains 7 steel wires, and the toothed belt is covered with wear-resistant cloth, which is silent and ensures that the bearing capacity of the belt is much higher than the counterweight. Anti-sway tracks are installed on both sides of the counterweight to limit the movable track of the counterweight and ensure that the counterweight always moves up and down in the track, which is smooth and silent;
(6)gas collecting hood: PVC material welding molding, with condensate sink function.
(7) sink: using Taiwan polymer PP material;
(8) Faucet: copper spray faucet, faucet switch placed outside the fume hood;
(9) Lamp: double 40W explosion-proof fluorescent lamp shall be adopted, and the lighting shall not be less than 500LUX;
(10) Pipeline: using special polymer composite materials;
(11) Fume hood power distribution: socket-using two multi-function sockets, safe and durable; each fume hood is equipped with leakage protection to ensure safe use;
(12)LCD control panel: color control LCD screen, after the controller is powered on, the red indicator light will light up and the system will enter the standby state. In the standby state, press the [On/Off] button to start the controller. The green indicator lights up and the LCD backlight turns on. It has the following functions:
A. Lighting on and off
B. Purge/standby opening and closing
C, fan open and close, air valve angle can be adjusted from 0-90 degrees.
D, system startup and automatic delay shutdown
E, air valve angle automatically return to zero
(13) anchor: stainless steel and ABS molding adjustable feet, anti-skid, shockproof, anti-corrosion;
(14) handle: 304 stainless steel handle, or a word handle;
Jerry Wu
Beito Laboratory System Equipment (Changzhou) Co., Ltd
Add: No. 5, Huangqi Road, Wujin District, Changzhou City, Jiangsu Province, China
Mobile: 86-18549930120
WhatsApp: 86-18549930120
http://www.laboratorystores.com/
